The latex paint on the walls above this shower pictured below started peeling.I scraped the paint off, but much of the paper from the drywall also came off.I would like to have the finished project be painted and have a bead of caulk between the shower and the drywall to prevent moisture from causing the peeling later down the line.I have cleaned the area and applied a coat of RomanRx-35 PRO-999 Interior Drywall Repair and Sealer Primer.I plan on applying a 2nd coat of pro-999.Next I will apply and sand Sheetrock brand All-Purpose Pre-Mixed Joint Compound.Then I will prime with KILZ Premium Interior/Exterior Multi-purpose Water-based Wall and Ceiling Primer.Then I will paint with a satin latex paintThen I will apply Kwik Seal Kitchen and Bath Adhesive Caulk around the top of the shower where it meets the wall.Where I am doubting myself is on the order of steps 3 through 6 above. Is this the best order or would another method be preferable?Thank you in advance!https://ift.tt/2USp26q via /r/DIY https://ift.tt/309U9ev
