Hey all, I’m looking for some help ensuring I measure correctly when boarding out some framing around a mirror.The install is as shown in my very very crappy picture https://ift.tt/35pvqWi with the mirror filled in in white, approx 5cm deep. I’ve framed in the surround (in yellow) to board it out close to flush to support surface MDF, and will be putting LED profile around the edge of the mirror of this type https://ift.tt/37E5Mym such my two concerns are : A: ensuring I leave enough, but not too much, room between the mirror and edge of the MDF for the recessed stripB: cutting the edge at the left hand wall so that it sits flush (the wall is an old one and isn’t 100% plum straight.Any advice appreciated as to how to measure up the MDF accurately, first time!If I’ve not given enough info then please ask and I can provide more via /r/DIY https://ift.tt/37FzZNR
