DIY paperbag floor http://bit.ly/2C8eHdq started this process by removing all the carpet from our home.Next step was to RIP up brown paper, we used a huge roll of brown packing paper. Crumple the paper up into balls.When ready to lay the floor, we mixed Elmer's glue and water 1:1 ratio. Straighten out the paper and dipped into the glue mixture. Lay paper on the floor and smooth out any air bubbles. Kept going slightly overlapping the paper. Waited 24 hour to dry. Once dried we did 5 coats of polyurethane.It is such a cheap and durable floor. Total cost for around 1000 sqft was around $250. via /r/DIY http://bit.ly/2CXPpjX
