Thanks in advance for any help yall are able to provide.tl;dr old irrigation controller installed weird w/o conduit and flipped from the necessary orientation for new controller. what to do?longer versionI am replacing a janky irrigation controller and the previous owner installed it in such a way that the solenoid wires and power wires run right into outdoor junction boxes with extremely small/no conduit to the controller: http://bit.ly/2UUR3ND you can see, the solenoid wires come in from the left and power from the right. Here's what it looks like once I stripped everything out: http://bit.ly/2GvvadY, my new controller wants the power in from the left and solenoid wires from the right: http://bit.ly/2UTpuVe know there must be a proper way to deal with this but I just can't come up with it. Is there some way to criss cross the wires inside 2 separate conduit? Do I need to remove these outdoor junction boxes, break open the wall, and reorient this? Something else?Thank you again for any ideas you might have. via /r/DIY http://bit.ly/2UCEuBy
