In a little predicament with mounting my TV on dry wall with metal studs. I've successfully found my studs and drilled a 1/2in hole through the metal to install my toggle bolt anchors.Problem is there appears to be another metal plating wall behind the wall I am mounting my tv on where I cannot drill past. I am trying to mount over my fireplace so my best guess would be something to do with the chimney exhaust system.So my main is problem there is not enough clearance to pass my toggle bolts. I am not even able to get the entire head through the hole without hitting the back wall. The bolts I am using sre these: https://ift.tt/2KWwCs0 wise my dry wall is about an 1in thick, with the distance to the back wall about 1.5 to 2in. Total distance from outside to back metal wall is approx 3in.I am considering using these however these are screwed in and I wouldnt know how I would get past by the initial metal stud https://ift.tt/2MuHL6E am hesitant to use others anchors such as these as I worry about the strength and again issuss with getting past intial metal stud. https://ift.tt/2L1cchC have suggestions on what to use?I am already in the process of buying a lighter mount to anticipate further issues with anchoring. via /r/DIY https://ift.tt/2KOYPCd
