Hi, I need help with repairing a commercial glass door and windows in my shop. I will attach pictures to give you an idea of what I am dealing with. The right side large glass door is a bit off kilter, so it does not close in the same plane as the door frame. Something similar happened once with the left side door, but I was able to adjust the "grip" of the steel frame on the glass to sort of shimmy it back up. This was possible because the frame itself was straight, just the glass somehow slid too low off the frame. However, this time it seems the entire door has sagged a bit, so even if I adjust the glass, it doesn't do anything. Does anyone have any experience with this kind of door? I don't want to loosen random stuff and have the 200 lbs door fall on me or someone else. How can I adjust the angle the door sits on?For the windows, it seems like the gasket is cracked so if I push the window, it feels very loose and possibly dangerous. Can I just silicone caulk it to reinforce it?Thanks for any help you can give.https://ift.tt/30uIRCA to use imgur but for some reason it says I need to fill out a captcha but doesn't give me a captcha thing to fill out. via /r/DIY https://ift.tt/2MBkXSO
