Hey guys,I hope this fits this sub, I didn't find a better fitting one. Today, my dishwasher malfunctioned. It's a *Exquisit GSP-9013 E Si* from Germany. I bought it used and don't have a manual and I googled for a while and can't find one, which is frustrating.It stopped washing the dishes and there was some water left in the washer. Restarting it solved the water issue at least on one program, since the pump appears to be functional.I quickly found that that the seal of the arm was worn off, so I removed it and I intend to plan to buy a new one in the evening. After that, I restarted the dish washer again and it ran for a while until it stopped again. All lights are blinking and the dishwasher was beeping several times. I noticed a slight clacking sound when opening and closing the door, so I opened the front panel by carefully removing all screws and found this:https://imgur.com/a/AZM1I4WIt's lying losely in the front panel and I don't have any clue about it's function or origin. It might have something to do with the little part that releases the dish washing tab on time. It was already broken when I bought the dish washer.I also took pictures of the now exposed electronics:https://imgur.com/a/dxxSx6aAnd of the lower part, which appears to hold parts of the mechanics.https://imgur.com/a/xHKiwQ2You can move the small metal part in the middle and the cylindrical part labeled "Dishwasher valve" has a hole on the bottom.I can and will provice more pictures if requested. I'd like to put the lose part on the place it belongs and moreover, I appreciate any help with the malfuncioning dish washer.Thanks a lot! via /r/DIY http://bit.ly/2UCWuRf
