Hey guys, this is a bar I made for my birthday party. It was a bit of a last minute idea so I had limited time. The whole thing was cut using an angle grinder as it was all I had access to when I had the motivation. Everything else was screwed and glued and sanded with an orbital sander. Cheap decking oil to make it look a bit more presentable and this is what I ended up with. http://bit.ly/2I16WLR always worked in trade but never in construction. I was a painter for quite a few years and now I'm a powder coater. I have never really built anything before so this was all new to me. There were definitely better tools I could have used for the job but didn't have them around and I didn't really want to buy/borrow them for this project.Full album link: http://bit.ly/2WLWDhZ hope you enjoy and don't be too harsh on me. I had actually planned on slapping together something much more monstorous until it surprisingly started coming togther quite nicely. Thanks for any feedback and comments. via /r/DIY https://ift.tt/2Utvp2d
