Trying to change this wall switch with a motion sensor. Current switch controls 2 light fixtures and one outlet. As I understand, the new motion sensor is a single pole use only meaning I can't control both the fixtures and the outlet together so I'm willing to let go of the wall outlet if I can get it to work with just the two light fixtures. There's one ground copper wire in the box but not connected to the switch. The current switch has a red wire in one screw, 2 black wires in the other screw and one black wire in one screw. New motion sensor has one green(ground), white (netural), black (hot) and red(load) wire. Any help would be appreciated. Pictures attached of the new and old wiring. https://ift.tt/2UWnffF via /r/DIY https://ift.tt/2OpHqjM
