I have spent many hours and sleepless nights on this. I've watched countless videos which just say - "just adjust the rollers to ensure a level slide" etc all to no avail.My problem is my shower door has started to drag along the top - the screw that holds the rollers to the attachment that fits to the glass is dragging along the outer edge of the rail which is making it impossible to slide from the outside and you either have to lift the door up, or push it towards the outside of the shower which helps the top rollers sit inside the rail a little more flush and lifts the rollers up a mm or 2. It's as if the top part of the door is leaning inwards towards the shower -- which isn't visible to the ear.I've removed all the rollers from the door and re-attached them. The bottom rollers appear to be screw in and don't roll, just act as a guide whilst the top ones do all the rolling. The bottom rollers have a spring in them but they appear to sit in the rail nicely. I've tried loosening the bottom rollers off the glass to help with the leaning (if there is one) all to no avail again.I don't think I need to buy new rollers as they look physically fine. How would I tell if I need new rollers? What else can I do to get this door sliding properly? via /r/DIY https://ift.tt/2B54AFW
