I used to have many long things such as wood slices, steel pipes, copper pipes, plastic stuff... All of them on the floor, collapsing all the time. Hence, I decided to find a better solution. And as I have that welding machine I need to learn on, I did this (whole tuto here in french: http://randomcraftr.com/?p=1273):https://i.redd.it/hmog9ttzl3721.jpgFirst I cut out 4 PVC pipes, to make sure the cutout will be accurate, I put a paper sheet around the pipe. When the side of the sheet meet, then I am ensured that the paper limit is 90° to the pipe. I do the cutout with a hand metal saw.http://bit.ly/2RocbJQ, I enclose the 4 tubes in a metal frame cut with a angle grinder and assembled with magnets. The two sides are larger than the frame cause I cannot put the 4 pipes directly on the wall. I have some evacuation pipe along the wall I cannot remove.http://bit.ly/2GLoxYp had two additional pieces at both extremities. I will put screws through it to attach it on the wall.http://bit.ly/2Rrc6oQ I put it on the wall: I can even sit on it whith my all 65kg. My welding is becoming better every day. I slide the 4 pipes within the frame. No more space to move, they are pretty well secured within the frame. Now, I can store many things and free some space on the floor.http://bit.ly/2GL6UYG via /r/DIY http://bit.ly/2ERlxHe
