My dryer stopped working a couple days ago. It has been working for the past month since I moved into this house. The vent was a little clogged so checked the thermistor and it was bad. I replaced it and when I put the dryer back together, the dryer still won't turn on. I checked the 3 prong outlet and I am getting 250V from the two hot prongs. Then I got about 20V between both hots and the neutral. Which doesn't seem right. When I checked at the dryer I got 250V between L2 and N, 250V between L2 and L1, and 0V between N and L1. (labeled here http://bit.ly/2A8sH6M) Shouldn't I be getting 250V between L2 and L1, with 125 between both L1&2 and N? Do I have a problem with the power connection? Is there anything I can do to fix it? via /r/DIY http://bit.ly/2LygaxP
