
Wanted to build this from the video: https://www.youtube.com/watch?v=GveWDLBmc8YI bought all the following parts:S.T.A.R. XR-5 1508 Airsoft Gun, Bottle Mount, Propane Extension Hose, Blow Torch, Propane Cylinder,The video seems pretty straight forward, but I had a couple questions for some portions of it.1)The propane torch has a slight curve to it. 1:25 mark at the video. https://youtu.be/GveWDLBmc8Y?t=85https://www.harborfreight.com/propane-torch-with-push-button-igniter-91037.htmlDo I have to straighten it out? If so, how do I do that? Manually bend or I have to heat it up and then bend?2) Trigger modification on the torch seems fairly simple, he just cuts and then seems to weld it back into the working position.3)The part I am most nervous about is cutting the extension hose and adding my own male adapter. I will make sure spray everything with soapy water to make sure nothing is leaking out. Anything else I should watch out for? I bought a couple clamps to make sure the hose will stay on tight.https://youtu.be/GveWDLBmc8Y?t=934)Since the torch's valve will be inside the housing, it should always be open and set to a slightly open position? What is the best way to handle that setting?Thanks for all the help! via /r/DIY http://ift.tt/2szjqmU