Hi guys!My first post, I hope I’ve done it right. If not, please point in the right direction.Recently our Wickes kitchen has been completed. Unfortunately, over the holidays, built-in freezer door has become detached from the cabinet cover door. This was because only one screw was used by the builders, as seen below.After install - http://ift.tt/2EdOklG order to fix the issue, they came and added a second screw, but that has not worked.At rest: http://ift.tt/2F7unhU Under pressure (notice how the bracket rotates and is about to slip off the rail): http://ift.tt/2Edi1TX the issue was over holidays, I tired myself and was able to remove their screw and added a slightly bigger one, but that has snapped! I took it our with pliers and used a different one, but that has also snapped. It seemed like the sharp edge was cutting the screws.This one I could not remove and this is how the bracket is left now: http://ift.tt/2F7uolY, under the pressure of opening the door, the bracket rotates and slips off the rail: http://ift.tt/2Eghd0v am now left with the same problem – only one screw is in, so when opening, the bracket rotates and slips off its rail.I cannot really get Wickes to repair this, as I was messing with it myself. So I am looking to glue this plastic holder to the metal fridge door.What are my best options, what glue / adhesive you recommend, so it can attach plastic to painted metal? Or any other ideas how to fix this bracket well?Thanks again and apologies if I have made mistakes with the post. via /r/DIY http://ift.tt/2F7upX4
