
Hey guys,I need some help with a project I’m working on. I’m making a coffee tray with old Starbucks coffee bags for my mom. I ironed the bags, glued them down, and then put a coat of a 2-part epoxy down (1:1)All went fine the first time, but it was only about 1/16th an inch. So I waited a day (only takes 8 hr to cure) and then mixed the second batch and put it on, and my dad mixed the other 1/2 of the batch and put it on.So here’s the problem. His half has cured nicely and without problem. My 1/2 is still tacky after 3 Days.What should I do. Is there a curing agent I can add. If not what is the best method to remove the 1/2 that’s uncured without ruining the whole thing and starting over?ThanksProject and Epoxy via /r/DIY http://ift.tt/2oTBsym