I'm scared to post this, but here goes nothing. I converted my built in tub to a tile shower and now I'm having a couple of issues. The first is that there is no hot water coming out of any taps in my house. After turning the water off and on at the hwh several times over the course of several weeks, yesterday when I turned it back on, the hot water won't run. The second issue is that when I turn the bathroom sink faucet on, water flows out of the slower head.I live on the bottom floor of a condo building. I've been cutting the water off at the hot water heater to work on the shower. I removed this whole valve and pipe and replaced it with this (these galvanized pipes were temporary) as this is how I was advised to do it online. This is the fixture installed.I read online the hot water thing may be air in the lines, and that I could cover the faucet and basically back fill the hot water line with cold water to get rid of the air, but I didn't have any luck with that.I know I'm in over my head here, but this is where I'm at and if I can fix it myself, I'd like to. Thanks for any info. via /r/DIY http://ift.tt/2ggXK68
