Late 90's GE Nautilus dishwasher water is not draining after running. Ran it again just to be sure.Does have an air gap. Cleaned that.Cleared out sump.Disconnected drain hose from disposal and tried to clear it out. Gets weird here. This seemed to fix the problem as I ran a short wash cycle after reconnecting the hose and the washer drained successfully. Ran another full cycle and the water returned.I will say that the drain hose is rubber as opposed to the new white corrugated ones, and whoever installed it sealed the connection to the disposal with the standard clamps as well as some sort of dried gooey sealant. Not sure if this is standard but my disconnecting the hose did break the seal, apparently, and it now has a small leak. Was going to reseal it.Would like to avoid going through the process of replacing the drain hose as I'm guessing I'd need to pull the entire unit out to do this. On the other hand, upgrading the hose is probably a good idea.pic via /r/DIY http://ift.tt/2lIlKiF
