I apologize for this fairly narrow question, but I'm in the process of trying to attach my 55" TCL C803 to a perlesmith stand and in order to make it so the bracket is not touching the casing, I have to use spacers. I have two questions:Is there anything problematic with stacking the spacers? I think for the bottom holes, I'll need 15mm of separation but I only got 5mm and 10mm spacers in the kit I bought so my plan was to just use one of each on top of each other. Will that cause any problems?The VESA specifications for my tv say the screw size is M6 x 25 (Note: I am making the possibly incorrect assumption that 25 refers to the length of the screw indicating 25mm). Although the TV comes with these screws already inserted, my plan was use the M6 x 30 screws that came in my kit. My question here is will I have problems if the length of screw being inserted in the TV is less than 25mm since I am using spacers? The top two screws will stick in 20mm (I'm using a single 10mm spacer up there) and the bottom two will stick in 15mm (since I am using a 5mm and a 10mm spacer).If anyone could give me some feedback, I'd really appreciate it. I'm all but ready to pop the tv on the stand but now I'm having paranoia of it immediately snapping off and was hopeful someone could either provide or point me to some instruction on this. via /r/DIY https://ift.tt/33iu6nq
